|
|
 |
|
Front Bumpers
Wondering what your front bumper will look like? Check out these
pics.
|
 |
 |
| |
|
|
Close-up of the D-tab and Gusset |
Close-up of the MWS Bridge & Receiver |
| |
|
|
 |
 |
| |
|
|
Close-up of the Longer Driver's Side Power
Steering Skid Mounting Tab (shown with Mopar skid) |
48" Front Bumper with Brush Guard, D-Tabs,
Flat Tow Brackets, MWS Bridge &
Receiver Painted Flat Black |
| |
|
|
 |
 |
| |
|
|
Side View of 48" Front Bumper with Recreational
Stinger, Integrated Winch Mount & D-tabs - Painted Satin Black |
Front View of 48" Front Bumper with
Recreational Stinger, Integrated Winch Mount & D-tabs |
| |
|
| t Back to
Offroad Armor |
|
Rear Bumpers
Wondering what your rear bumper will look like?
Check out these pics.
 |
 |
| |
|
|
59" Rear Bumper with
D-Tabs, 2" Receiver & Safety Chain Bracket Painted Gloss Black |
Close-up of the D-Tab and
Gusset |
| |
|
 |
 |
| |
|
|
Close-up of 2" Receiver,
Safety Chain Bracket and the Two Center Cross Member Tie-in's (note
how the cross member tie-in's are aligned with the two 'slots' in
the cross member to provide installation access without dropping the
gas tank/skid) |
Medium View of the
Receiver, Safety Chain Bracket and Center Cross Member Tie-in's |
| |
|
 |
 |
| |
|
|
Close-up Top View of
D-Tab, Gusset and Outer Passenger Side Cross Member Tie-in |
Close-up Side View of
D-Tab, Gusset, Outer Cross Member Tie-in and Frame Tie-in (under
frame rail; note how it is tied in to both the cross member mount
and the bumper itself) |
t Back to
Offroad Armor
|
|
|
|
Write-ups
Our write-ups cover the gambit from the simple to the complex. If you're
planning a modification in the near future browse our library of
write-ups for a little additional insight.
|
|
