Configure Your Front
Bumper
|
|
|
Base TJ/LJ Front Bumper: $209.99
-
2"
X 5" Rectangular Base Made from 3/16" Stock
-
3/16" Frame Mounts with 1/4" Frame-width Top Plate
-
45°
Corners with Capped Ends for Better Approach Angles
-
Driver's Side Mounting Tab for Power Steering Skids
-
Delivered Unpainted/coated Ready for Your Custom Finish
-
Uses OEM Mounting Holes & Hardware
-
Keep OEM Tow Hooks if Desired
-
Includes Tabs for Fog Lights in Stock Location
Note:
Optional MWS Bridge/Receiver, Brush Guard, Flat Tow Brackets &
D-Tabs Shown |
 |
| |
48" TJ/LJ Front Bumper with Optional Brush Guard,
MWS Bridge/Receiver, Flat Tow Brackets & D-Tabs
with
Flat Black Spray Paint Finish |
|
Options: |
More Front Bumper
Pics |
| |
|
|
D-Tabs: $24.99/pair
|
Brush Guard: $29.99
- 1 3/4" O.D., .120 Tube Construction
- Inside Dimensions: 26 1/2" W (at base) X 12" H
- Allows for Re-mounting of OEM Tow Hooks
- Not Compatible with Stingers
|
|
| |
| |
|
|
MWS Bridge & Receiver:
$74.99
-
Required for Mobile
Winch System (MWS)
-
Allows Mounting of
Winch in Front
-
Also Order MWS
Cradle & Front
Wiring Harness
-
2" Receiver Hitch for
Winch Cradle Mounting
-
2X3X3/16" Steel Bridge
for Additional Strength
|
Integrated Winch
Plate: $34.99
-
Integrated into Our
1/4" Steel Top Plate
-
Standard 10" X 4 1/2"
Bolt Pattern (fits most winches; check your before ordering)
-
Fairlead Mount at Front
of Bumper
-
Requires Removal of
Plastic Sway Bar Shroud
|
|
|
| |
|
|
32" Recreational
Stinger: $29.99
-
Not Intended to Be a
Functional Stinger
-
Top of Stinger is
Approximately 2" Higher than Hood
-
Not Compatible with Brush
Guard
|
42" Functional-Ready
Stinger: $34.99
-
Requires Fabrication of
Frame or Shock Tower Tie-ins
-
Top of Stinger is
Approximately 6" Higher than Hood
-
Not Compatible with Brush
Guard
|
|
|
| |
|
|
Integrated 2"
Receiver: $59.99
|
Pre-Drilled Holes for
License Plate: $10.99
-
For States Where Front
License Plates are Required
-
Mounting Hardware &
Screws Not Included
-
Not Compatible with 2"
Receiver
|
|
|
| |
|
| |
|
|
Configure Your Rear
Bumper |
|
|
Base TJ/LJ
Rear Bumper: $219.99
-
2X5 Rectangular Base Made from 3/16" Stock
-
2 3/16" Frame Tie-ins Standard
-
8 Rear Cross Member Tie-ins (requires drilling 4 holes)
-
45°
Corners with Capped Ends for Better Approach Angles
-
Delivered Unpainted/coated Ready for Your Custom Finish
-
Uses 4 OEM Cross Member Mounting Holes & 2 OEM Frame Mounting
Holes (and frame mounting hardware)
-
Keep OEM Tow Hook if Desired
-
All Required Additional Mounting Hardware Included (Grade 8)
Note: Optional D-Tabs, 2" Receiver & Safety Chain Bracket
Shown |
 |
| |
59"
TJ/LJ Rear Bumper with Optional
D-Tabs, 2" Receiver & Safety Chain Bracket
with Gloss Black Spray Paint Finish |
|
Options: |
More Rear Bumper Pics |
| |
|
|
D-Tabs: $24.99/pair
|
Integrated 2"
Receiver & Safety Chain Bracket: $64.99
-
Standard 2" Receiver
-
No Safety Chain Loops or
Bracket
-
Centered Vertically &
Horizontally in the Bumper
-
Tucked Tight for Better
Departure Angles
|
|
|
| |
|
|
Rear Tire Carrier: Coming Soon! |
|
