|
|
 |
|
Safety
& Recovery
If you go off road, you're going to get into "situations." Our safety
and recovery gear is meant to help minimize the carnage associated with
those situations and get you out to wheel another day. If you're looking
for something and don't see it here, Contact Us.
We can probably get it for you.
Safety & Recovery Product
Index
Winches
Winch Accessories
|
Warn XD9000i
Multi-Mount™ Winch Kit
All the power and reliability of the XD9000i in a portable
package. No-load retrieval line speed is fast-38 feet/minute.
Integrated control pack protects the winch's electrical
components, and the 4.6hp Series WoundTM motor
delivers big torque and power. Plugs into any standard 2"
Class III receiver hitch and gives you the ability to move the
winch from the front or back of your rig. Power is supplied
through quick connect plugs. A good choice for full-size rigs
and heavier recovery situations.
This Kit includes winch, remote, carrier, 7.5' power lead with
quick connect plug for front of vehicle and hawse fairlead.
Front receiver and rear power lead sold separately.
|
| XD9000i MULTI-MOUNTTM
SPECS/PART NUMBERS |
| Part Number: PN 37441 |
| Rated Line Pull: 9000 lbs. (4080 kgs.)
single-line |
| Motor: 12V 4.6hp, Series WoundTM
|
| Remote Control: Remote switch, 12' (3.7m) lead
|
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
|
| Weight: 104 lbs. (47 kgs.) |
| Wire Rope: 125', 5/16" diameter (38m, 8mm
diameter) |
| Fairlead: Hawse |
| Recommended Battery: 650 CCA minimum for
winching |
| Battery Leads: Front heavy-duty 7.5'/2.2m with
quick connect plug |
| Finish: Argent Powder Coat |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
38(11.6) |
70 amps |
1/9000(4082) |
| 2000(910) |
14.4(4.39) |
180 amps |
2/8190(3715) |
| 4000(1810) |
11(3.35) |
255 amps |
3/7500(3402) |
| 6000(2720) |
8.67(2.64) |
330 amps |
4/7010(3180) |
| 8000(3630) |
6.88(2.10) |
415 amps |
5/6570(2980) |
| 9000(4080) |
6.38(1.94) |
460 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
Includes: winch, 125' 5/16" wire rope, hawse fairlead,
hook, remote control, 7.5 foot front quick connect
power lead (rear sold separately), carrier
Price: $994.99
Shipping: FREE!
|
|
p
Back to Top |
|
 |
Warn 9.5TI
Multi-Mount™ Winch Kit
The new 9.5ti Multi-Mount™ packs 9500lbs of portable
pulling capacity into a massive 12.5lb aluminum die-cast body.
The new shape not only looks great, but sheds the elements
like no other winch on the market: seals at the key points
give extreme-duty water resistance. A Gen II Bosch motor
delivers just the right balance between torque and speed. Plus
another Warn Industries first - operator feedback - the
thermometric indicator gives the operator information about
motor temperature during the winching operation.
The 9.5ti Multi-Mount includes winch, remote, carrier, 7.5'
power lead with quick connect plug for front of vehicle and
hawse fairlead. Front receiver and rear power lead sold
separately.
|
| 9.5ti MULTI-MOUNTTM
SPECS/PART NUMBERS |
| Part Number: PN 65735 |
| Rated Line Pull: 9500 lbs. (4310 kgs)
single-line |
| Motor: Gen II, Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 112 lbs. (51 kgs.) |
| Wire Rope: 125', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Hawse |
| Recommended Battery: 650 CCA minimum for
winching |
| Battery Leads: Front heavy-duty 7.5'/2.2m with
quick connect plug |
| Finish: Chromate with High-gloss Powder Coat |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
62(18.9) |
47 amps |
1/9500(4313) |
| 2000(910) |
16.3(4.97) |
160 amps |
2/8650(3927) |
| 4000(1810) |
11.8(3.60) |
230 amps |
3/7920(3595) |
| 6000(2720) |
9.31(2.84) |
305 amps |
4/7400(3359) |
| 8000(3630) |
7.59(2.31) |
370 amps |
5/6940(3150) |
| 9500(4310) |
6.67(2.03) |
425 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
Includes: winch, 125' 5/16" wire rope, hawse fairlead,
hook, remote control, 7.5 foot front quick connect
power lead (rear sold separately), carrier
Price: $1149.99
Shipping: FREE!
|
|
p
Back to Top |
|
|
|
|
|
 |
Heavy Duty (175
Amp) Power Lead for Multi-Mount Winch Kits
The whole point of the Mudinyeri Offroad
Mobile Winch System™ (MWS) is to be able to winch yourself forward
or backward by placing the winch on the front or rear of your
vehicle. The power lead allows you to route the necessary 12 volt
electrical current to the rear of your vehicle (or any other place
you would like). Available in a
variety of lengths, the power lead is compatible with both of
the Warn Multi-Mount™ kits sold above.
Includes: 2 AWG positive and
negative wire leads, quick connect, dust cover
Price:
5' Power Lead: $64.99
10' Power Lead: $84.99
15' Power Lead: $104.99
20' Power Lead: $124.99
25' Power Lead: $144.99
30' Power Lead: $164.99
Shipping:$12.00
|
|
p
Back to Top |
|
|
|
|
|
 |
Heavy Duty (175
Amp) Power Extension for Multi-Mount Winch Kits
Being able to use your MWS™ on either end of
your vehicle is great! What could be better? How about being able
to use it on your trailer too?
Now you can utilize the same winch that
you use to get out of those off-road "situations" to pull a
disabled vehicle onto your trailer. Just equip your tow rig with
one of our Heavy Duty Rear Power Leads (above) and run this
extension to your trailer (winch receiver mount for trailers sold
separately).
These power extensions are good for a
variety of other uses as well!
Includes: 2 AWG positive and
negative wire leads, quick connects at each end
Price:
5' Extension: $74.99
10' Extension: $94.99
15' Extension: $114.99
20' Extension: $134.99
25' Extension: $154.99
30' Extension: $174.99
Shipping: $12.00
|
|
p
Back to Top |
|
|
|
|
|
 |
Heavy Duty (175
Amp) Quick Connect Jumper Cables
As a complement to our other MWS™
accessories, we offer quick connect jumper cables. Save yourself
the hassle of raising the hood and connecting to your battery
terminals. Just plug and go!
Includes: 2 AWG positive and
negative wire leads, quick connect at one end positive and
negative heavy duty clamps
Price:
15' Cables: $104.99
20' Cables: $124.99
25' Cables: $144.99
30' Cables: $164.99
Shipping: $12.00
|
|
p
Back to Top |
|
|
|
|
|
 |
Heavy Duty (175
Amp) Quick Connector Plug in style connectors offer a
safe connection means with quick disconnect/connect. The contacts
can be crimped or soldered onto the cable and then inserted into
the housing where they securely lock in place.
Plugs inter-mate with each other and are marked for polarity
with a + for positive and a - for negative to ensure the proper
connection.
Includes: 1 connector and 2
terminals (2 connectors shown)
Price: $17.99
Shipping: $3.95
Coming Soon!
|
|
p
Back to Top |
|
|
|
|
|
 |
Heavy Duty (175
Amp) Quick Connect Dust Cover
This protective dust cap keeps debris out of the Heavy Duty Quick
Connector plug (sold above) when not in use.
Includes: 1 protective cap
Price: $7.99
Shipping: $3.95
Coming Soon!
|
We Accept:
We Ship Via:
|
|
|
|
Products
In our Products section you'll find everything from light-hearted decals
to hardcore bumpers. Check it out here.
Write-ups
Our write-ups cover the gambit from the simple to the complex. If you're
planning a modification in the near future browse our library of
write-ups for a little additional insight.
|
|
)
